Additional information
| Weight | 3.68 lbs |
|---|---|
| Dimensions | 14.25 × 9.5 × 7.5 in |
| Manufacturer |
Category: Autopilot
Item# 00180-2700
MPN: 065-00180-2700
TRIM SERVO/3.6 RPM
Only 1 left in stock
TRIM SERVO/3.6 RPM Overview:
The KS 272C Trim Servo is used for elevator trimming. This unit (00180-2700) is rated at 3.6 RPM.
- Contains a servo motor with amplifier and an engage clutch solenoid
- Is installed with a KM 275 servo mount, which contains a slip clutch
- The servo receives a differential command input and drives the servo motor with a speed proportional to the magnitude of the command
- The command polarity will determine direction of the servo rotation
- The command inputs have an impedance of at least 15K ohms
Weight:
2.1 lb
Dimensions:
3.925 x 4.675 x 4.605 in
Mounting:
Two (2) AN 3 bolts
Power Inputs:
+28VDC at 4.0 amps
Clutch Engage Signal:
+28VDC (active high input) and Ground (active low input)
Mating Connector:
030-03248-0000
Signal Inputs:
-10VDC to +10VDC
Signal Outputs:
Trim Voltage: -28VDC to +28VDC
Trim Sense: -3VDC to +3VDC
Product Codes | |
|---|---|
| Mfr Part No : | 065-00180-2700 |
| SCHEDULE B CODE : | 9014.20.4000 |
| TSO : | C9c |
No documentation currently for this item
Additional information
| Weight | 3.68 lbs |
|---|---|
| Dimensions | 14.25 × 9.5 × 7.5 in |
| Manufacturer |
Category: Autopilot
Item# 00180-2700
MPN: 065-00180-2700
Notice: Generation Pilot has made every effort to verify the accuracy of the codes, classifications, and part approvals listed in accordance with the Department of Commerce, U.S. Census Bureau, Bureau of Industry and Security, U.S. Department of Defense and Federal Aviation Administration. Generation Pilot does not assume responsibility for errors or omissions. This listing is subject to change without notice.
Warning to Exporters: Generation Pilot does not assume responsibility for errors with any of the Schedule B Commodity Codes or Export Control Classification Numbers in this listing. It is the Exporter’s responsibility to research and supply the correct codes and classifications for the product to be exported. Some products may require an Export License in order to be exported.
In Stock & Ready to Ship!
All products are in stock and ship same day!
Low Every Day Prices
Everything you need, all in one place!
FREE SHIPPING
On all orders $250 and above!
