Additional information
| Weight | .64 lbs |
|---|---|
| Dimensions | 4 × 5 × 2 in |
| Manufacturer |
Category: ADS-B, GPS, WAAS
Item# MILLDCBS-T
MPN: MIL-LDCBS1X2-TNC
Passive Military GPS Splitter | 1 Input, 2 Output, TNC Connector
Only 1 left in stock
Passive Military GPS Splitter | 1 Input, 2 Output, TNC Connector Overview:
The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards.
This mil-spec GPS splitter (Generation Pilot # MILLDCBS-T) features one input & two outputs, and has TNC-type connectors.
- Precise amplitude balance: < 1 dB variation between ports
- Flat group delay: < 1 ns between L1 & L2 bands
- Low insertion loss: -4.0 dB loss across operating frequencies
- Wide accepted frequency range: covering entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
- Matched phase balance: < 2° variation between ports
- Qualification and test reports available
Weight:
10.2 lb, max.
Dimensions:
1.3 x 3.25 x 2.5 in (without connectors)
Operating Temperature:
-57°C to 87°C
Housing base plate Finish:
electroless nickel-plated (MIL-C-26074C, class 1)
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-3.0 dB to -5.0 dB (-4.0 dB, typical)
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.10 dB, typical (1.0 dB, max.)
Phase Balance:
1.0°, typical (2.0°, max.)
Isolation:
L1: 22 dB
L2: 15 dB
Group Delay Flatness:
0.10 ns, typical (1.0 ns, max.)
Connector Option:
TNC-type female
Product Codes | |
|---|---|
| Mfr Part No : | MIL-LDCBS1X2-TNC |
| ECCN : | 7b994 |
| SCHEDULE B CODE : | 9014.80.6000 |
No documentation currently for this item
Additional information
| Weight | .64 lbs |
|---|---|
| Dimensions | 4 × 5 × 2 in |
| Manufacturer |
Category: ADS-B, GPS, WAAS
Item# MILLDCBS-T
MPN: MIL-LDCBS1X2-TNC
Notice: Generation Pilot has made every effort to verify the accuracy of the codes, classifications, and part approvals listed in accordance with the Department of Commerce, U.S. Census Bureau, Bureau of Industry and Security, U.S. Department of Defense and Federal Aviation Administration. Generation Pilot does not assume responsibility for errors or omissions. This listing is subject to change without notice.
Warning to Exporters: Generation Pilot does not assume responsibility for errors with any of the Schedule B Commodity Codes or Export Control Classification Numbers in this listing. It is the Exporter’s responsibility to research and supply the correct codes and classifications for the product to be exported. Some products may require an Export License in order to be exported.
In Stock & Ready to Ship!
All products are in stock and ship same day!
Low Every Day Prices
Everything you need, all in one place!
FREE SHIPPING
On all orders $250 and above!
