Additional information
| Weight | 1.25 lbs |
|---|---|
| Dimensions | 11.25 × 11.25 × .25 in |
| Manufacturer |
Category: Build supplies
Item# M/2-2R-25
MPN: 04-M22529/2-2R-25
NASM2259/2 Mil-Spec Composite Grommet Edging | Fits 0.036 – 0.063 inch panels
Only 1 left in stock
NASM2259/2 Mil-Spec Composite Grommet Edging | Fits 0.036 – 0.063 inch panels Overview:
Spring-Fast Mil-Spec composite grommet edging is designed for the high performance needs of the defense industry for use on airframes, tactical vehicles & ground based electronics. Grommet Edging is FAA Approved and installs in seconds allowing for immediate wire routing — no adhesive curing, clean up, or inspections. The NASM2259/2 series features an abrasion resistant subsurface and a polymer cushion to provided a soft surface for protecting wires and cables.
This NASM2259/2 Mil-Spec grommet edging (EDMO# M/2-2R-25):
- Fits panels 0.036 in – 0.063 in
- Width 0.20 inches
- Comes on a 25 foot roll
Features:
- Meets military specifications
- FAA Approved
- Continuous heat up to 185°F (85°C)
- Temperature operation as low as -40°F (-40°C)
- High Corrosion Resistance
- UL94 V-0 flammability rating
- High shock and vibration resistance to RMS G 41.7
- Superior dielectric strength
- Continuous edge protection for 90° inside and outside corners
- Continuous edge protection on inside and outside radius of any size
Sheet Thickness:
0.036 in – 0.063 in (0.90 mm – 1.60 mm)
Width:
0.20 in (5.10 mm)
Length:
25 ft roll (7.6 m)
Axis Conformity:
2
Vicat Softening Point per ASTM D01525 Rate B:
Thermoplastic Elastomer Cushion
Operating Temperature:
-40°F to 185°F (-40°C to 85°C)
Dielectric Strength:
1,500 volt @ 60 Hz
Substrate:
Type 304 Stainless Steel
Taber Abrasion Resistance:
TPE Cushion Per D1044 1 kg load, C17 wheel 25 mg 1,000 cycles
Finish:
Epoxy
Color:Lime green FED STD 595
Color Number: 14553
Salt Spray Hours:
2,000 hr, ASTM B117.MIL-STD-202, Method 301
Immersion:
Per NASM22529 and Skydrol Compatible
Random Shock & Vibration:
MIL-STD-1344, Method 2005.1 Test Condition VI, Letter J
Duration 8 hr longitudinal and 8 hr perpendicular. rms 41.7
Flammability:
UL94V-0 - File No. E113553 NZMT2
MIL-STD-202F, Method 111A
FAR 25.853 Telcordia GR63 Core
Product Codes | |
|---|---|
| Mfr Part No : | 04-M22529/2-2R-25 |
| MIL SPEC : | M22529/2-2R-25 |
| ECCN : | EAR99 |
| MIL SPEC : | M22529/2-2R-25 |
| NSN : | 5325-01-527-9534 |
| SCHEDULE B CODE : | 7326.90.8595 |
Documentation
Additional information
| Weight | 1.25 lbs |
|---|---|
| Dimensions | 11.25 × 11.25 × .25 in |
| Manufacturer |
Category: Build supplies
Item# M/2-2R-25
MPN: 04-M22529/2-2R-25
Notice: Generation Pilot has made every effort to verify the accuracy of the codes, classifications, and part approvals listed in accordance with the Department of Commerce, U.S. Census Bureau, Bureau of Industry and Security, U.S. Department of Defense and Federal Aviation Administration. Generation Pilot does not assume responsibility for errors or omissions. This listing is subject to change without notice.
Warning to Exporters: Generation Pilot does not assume responsibility for errors with any of the Schedule B Commodity Codes or Export Control Classification Numbers in this listing. It is the Exporter’s responsibility to research and supply the correct codes and classifications for the product to be exported. Some products may require an Export License in order to be exported.
In Stock & Ready to Ship!
All products are in stock and ship same day!
Low Every Day Prices
Everything you need, all in one place!
FREE SHIPPING
On all orders $250 and above!
