Additional information
| Weight | .6 lbs |
|---|---|
| Dimensions | 5 × 4 × 1.5 in |
| Manufacturer |
Category: Antennas
Item# LDCBS1X2T
MPN: LDCBS1X2-TNC
Passive GPS Antenna Splitter | 1 input, 2 output, TNC Connector
In stock
Passive GPS Antenna Splitter | 1 input, 2 output, TNC Connector Overview:
This loaded DC blocked passive splitter features one input and two outputs for splitting gps RF signals from 1.1 GHz to 1.7 GHz. This splitter is designed to deliver GPS signals within the L1 frequency band to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device up to supply power to the antenna or other up device. The other ports (J2—J4) are DC blocked and loaded with a 200Ω resistor which simulates antenna draw to prevent alarm faults.
This passive GPS splitter (Generation Pilot # LDCBS1X2T) has one input and two output ports and has TNC connectors.
- Precise amplitude balance: <1 dB variation between ports
- Flat group delay: <1 ns variation between L1 & L2
- Low insertion loss: -4.0 dB loss typical across operating frequencies
- Wide accepted frequency range: cover entire L-band & major GNSS constellations
- Efficiently block ports: 200Ω resistors prevent antenna alarm faults
- Matched phase balance: 2° variation between ports
Weight:
10.2 oz (289 g)
Dimensions:
1.3 x 3.25 x 2.5 in, max. (not including connectors)
Operating Frequency:
-57°C to 87°C
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-3 dB to -5 dB
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.1 dB, typical (1.0 dB, max.)
Phase Balance:
1.0°, typical (2.0°, max.)
Isolation:
L1: 22 dB, min.
L2: 15 dB, min.
Group Delay Flatness:
0.1 ns, typical (1.0 ns, max.)
Connector Option:
TNC connector
Product Codes | |
|---|---|
| Mfr Part No : | LDCBS1X2-TNC |
| ECCN : | 7B994 |
| SCHEDULE B CODE : | 8526.91.0070 |
No documentation currently for this item
Additional information
| Weight | .6 lbs |
|---|---|
| Dimensions | 5 × 4 × 1.5 in |
| Manufacturer |
Category: Antennas
Item# LDCBS1X2T
MPN: LDCBS1X2-TNC
Notice: Generation Pilot has made every effort to verify the accuracy of the codes, classifications, and part approvals listed in accordance with the Department of Commerce, U.S. Census Bureau, Bureau of Industry and Security, U.S. Department of Defense and Federal Aviation Administration. Generation Pilot does not assume responsibility for errors or omissions. This listing is subject to change without notice.
Warning to Exporters: Generation Pilot does not assume responsibility for errors with any of the Schedule B Commodity Codes or Export Control Classification Numbers in this listing. It is the Exporter’s responsibility to research and supply the correct codes and classifications for the product to be exported. Some products may require an Export License in order to be exported.
In Stock & Ready to Ship!
All products are in stock and ship same day!
Low Every Day Prices
Everything you need, all in one place!
FREE SHIPPING
On all orders $250 and above!
